GENERAL FEATURES

Threaded valve ends, as per ISO 228/1 and ISO 7/1 – other types available on request.

Assembling is possible in all positions: upright, flat or angled. 

Range available from 3/8” to 2” in the Double Acting versions, Spring Return N.C. from above and below the plug, Spring Return N.O. from below the plug.

According to 97/23 EC “PED”

ATEX version in conformity  with directive 94/9/EC (to request at time of order)   

The variations in the actioning of the valve, the several combinations and the possibility to intercept the fluid from above or below the plug, originate multiple versions of the automatic valve. 

In the table below are indicated the standard versions with the main parameters.

On the basis of the kind of valve and the variations of pressure ?P that must be intercepted, the necessary control pressure can be individuated, and consequently, the code for the corresponding valve. 

Operating media

Air,water, alcohol, oil, petroleum products, saline solutions, steam, etc. (as long as compatible with AISI 316 or Bronze RG5).

Pressure from 0 to 16 / 25 bar (steam from 180°C, from 0 to 10 bar) depending on the size and model chosen (see following pages).

Temperature from –10°C to 180°C.

Max. viscosity 600 cst (mm2/s).

Control media

Driving media: compressed air, lubricated or dry, gas or neutral media.

Ambient temperature: -10°C to +60°C